Attaching your noise maker
Look out!
The noise produced by your headphones when connected to CodeBug could be loud enough to damage your ears. Do not put headphones in your ears when they are connected to CodeBug.Be careful
Use cheap headphones when connecting them to CodeBug as misuse could damage the headphones.You can make music with CodeBug using a sounder or headphones/speakers and crocclips. First connect a black crocclip to the GND leg on CodeBug and a coloured crocclip to leg 0 on CodeBug.
To play the music through headphones or a speaker, clip the black crocclip that is connected to the GND leg, to the metal part of the headphone plug that is closest to the plastic cover. Now connect the coloured crocclip to the tip of the headphone plug. There should be a middle metal part of the plug that is not touching either crocclip.
Warning: This will be very loud, do not put the headphones into your ears.
To play music through a sounder, connect the black crocclip to one leg of the sounder and the coloured crocclip to the other leg of the sounder.